I can’t find the remote for my Samsung TV. I’ve looked everywhere but I just can’t seem to locate it.
Has this happened to you or is it happening right now? If you’ve experienced or are experiencing your Samsung TV’s red light blinking 5 times, this article is for you.
Samsung TVs are a high-quality product, but just like any other electronic device, they can develop faults. We will look at possible causes and possible fixes.
A few you can fix yourself with DIY methods, and others you cannot.
If you try the suggestions here and they don’t help, please contact Samsung customer support.
Samsung TV Red Light Blinking 5 Times? Causes
Unlike some other TVs that use blink codes to identify the problem, Samsung doesn’t use them.
There is no guide for resolving a case. We can only guess what the issue is.
You need to contact an authorized Apple service center.
It could also be a power issue. But we don’t know for sure.
Even if you try this fix and it does work, your TV might repeat this from time to time.
We now have an effective treatment for that symptom, and we are confident that the underlying problem has been fixed.
If you have a power board problem, the TV might not be able to charge properly, and you may want to see a professional to take a look.
If you’ve ever opened a TV or other electronic device that says “TV capacitor” in its warranty, it’s likely a capacitor has
If they are faulty, your TV won’t turn.
Possible Fixes for the Samsung TV Red Light Blinking 5 Times Issue
Samsung TV Red Light Blinking 5 Times? Fix 1: Reset Your TV
It’s best to get the cord unplugged from the wall socket for about 15 minutes once in a while.
Before plugging it back in, hold down the power button and plug in the TV to the power source at the same time.
You need to know this trick to fix it yourself if it happens again.
Samsung TV Red Light Blinking 5 Times? Fix 2: Replace LEDs
If you are techy, you can remove the backlight LEDs from this monitor.
Check each LED strip for continuity to make sure the wiring isn’t shorted or damaged.
If there are a couple of them burnt out, this could be the reason for your Samsung TV red light blinking without turning on.
You should change the LEDs every time they burn out, because they are very expensive.
Samsung TV Red Light Blinking 5 Times? Fix 3: Get a New Power
If it’s a battery, getting a new battery will get the TV to work.
It’s better to try out a new TV before you decide to replace the old one with a new one.
You can pull the power board, but you’ll have to replace all the caps.
Make sure you use capacitors with the same capacitance, or more than capacitance on the other leg of the circuit.
The polarity should be correct and you don’t need to use a soldering iron when creating circuit boards.
To know for sure whether the caps have become bad, you should get an ESR tester.
You can get a service manual from Samsung too.
The document will help you understand the meaning of the codes on your camera. Maybe point out something that you have to change on your camera or show you something that you didn’t know about it.
If you’re having trouble with any Samsung device, contact Samsung customer support. They should have the solution for you.
You can contact them by email or just leave it at their collection point.
They may recommend that you try yourself. If you have HDMI devices plugged in, unplugging them may be enough to get your TV working again.
If you have a warranty, it’s probably in your best interest to contact Samsung right away and get the problem fixed.