Don’t worry, we will share all the possible methods to fix this problem. At the end of this article, you will get a working solution, so keep following the procedure. Most of the users must be facing Xbox One Error where “system error e105” appears that prevents them from using the console.
Some of the users may encounter this problem at regular intervals, but others on every system startup. Before knowing the solutions, it is essential to discuss the reasons behind those problems that cause this problem.
- Xbox generates temporary files without any resistance to contribute to the stability of the operating system. If this is the problem leading to an error code, it can solve using the power cycling method.
- In some cases, the firmware files may affect due to an unexpected system shutdown leading to this error code. To solve this problem, you need to update the system from the StartupTroubleshooter on the menu.
- Your data might be corrupted persistently, that the system cannot deal with itself until you force it to do so. To fix the problem in this situation, boot into the StartupTroubleshooter menu and execute a factory reset.
- If you have tried every solution related to software and still the problem is there, the chances are there might be HDD failure.
Now we will discuss the processes discussed earlier in detail so you can follow each step to fix the problem.
Method 1: Power Cycling Process:
Start with clearing the temp folder on Xbox One console to remove corrupt files generated by your system’s operating system. This can efficiently be executed with the power cycling process. Removing a temporary file from the system will also drain the power capacitor, as a result, can fix a myriad of HDD issues in the emergence of the System Error E105 issue.
To perform a power cycling process, follow these steps carefully.
- Make sure your console is booted and in an idle mood rather than in hibernation.
- Press the Xbox Button for almost 10 seconds until the LED stops flashing and the fan shuts off.
- After shutting off the console, disconnect the cables, let the capacitor power drain completely, and wait for at least one minute before plugging in the cables again.
- Power on the console and see if Xbox animation appears. If it does, the process is completed successfully.
The chances are Error Code 105 has been fixed successfully, but if not, there is another method to follow.
Method 2: Manually Update Firmware
The problem you are facing might be due to firmware’s inconsistency that generally occurs when an unexpected system shuts down.
The problem can lead to firmware issues that, as a result, inhibit the ability to boot. Update the current firmware with the latest version, and the situation might get fixed.
Download the latest version of drivers from the official website of Microsoft.
- To perform the offline updates, a USB flash drive is required, which means you need a PC as well.
- Insert USB and format it by marking NTFS under file system option, mark quick format option, and click start.
- After formatting the drive using the above steps, download the latest drivers from Microsoft’s official website for your Xbox console.
- After downloading the drivers, extract the driver’s files to the USB flash drive’s root folder.
- Remove USB from PC and plug it in your console.
- Press and hold the bind button and eject button simultaneously, and then short press the Xbox button.
- Release these two buttons once you hear two running tones and wait until the StartupTroubleshooter appears on your screen.
- Now insert the USB that contains updated drives and select the Offline System Update box by pressing the X button.
- Wait for the process to complete. Generally, it takes almost 10 minutes, but the time may vary depending upon your flash.
- After updating successfully, move to the next method below.
Read more: How to Fix Roblox Error Code 400
Method 3: Factory Reset Xbox One:
If you are still facing the same error code 105 on the screen, you are probably dealing with a persistent corrupted OS file that cannot be fixed by updating firmware. Try a factory reset using the StartupTroubleshootermenu. You might lose all the data so if you have important data, try backing up first and then go for factory reset.
To factory reset the Xbox follow all the steps in the previous heading to reach the StartupTroubleshooter menu. Now click the “Rest this Xbox” option and select Remove Everything. Still, if the problem is not yet resolved, replace the HDD or send it for repair.
Learn More Best Hamachi Alternatives
We hope one of the above methods has worked on your console, and the problem is fixed. In other cases, there might be a hardware issue so try repairing it.