You are in the middle of watching a movie, and you turn on your TV, but the screen just keeps flashing this red power light with
When your tv screen stops working, it can be the next thing that makes you feel really bad about yourself.
A lot of customers are reporting that their new Samsung TV won’t turn on.
It could be one of many things that causes this problem.
But first, let’s see why it happens.
Visit: Best cricket betting strategies for punters
Samsung TV Power Light Blinking Won’t Turn On? Causes
It could be from something as simple as a faulty remote control to an error with its power management system.
A power surge due to a fault could have damaged the whole power supply system or the power transformer or some key components like capacitors and transistors.
To make sure this didn’t happen to your home, take photos and record your observations.
A red light that appears on the display of a smart tv may be because there is an issue with the surge protector.
A surge protector is used to help keep your TV from getting fried.
If your TV experiences a surge that could have damaged it, the surge protector will take the excessive current flow from your power supply. It will damage itself in the process.
If your surge protector is damaged, worn out, or not supplying enough voltage to your TV, then the TV won’t turn on.
Your PlayStation may need repair due to a hardware issue. If you previously connected your PlayStation to your TV and after playing your game you switched the console off without changing the source of the HDMI input, the console might stop your TV from starting properly.
The worst-case scenario is that your TV’s panel has died. The fix is simple, but the panel does take a few minutes to replace.
Samsung TV Power Light Blinking Won’t Turn On? Working Fixes
Samsung TV Power Light Blinking Won’t Turn On Fix 1
If you have a remote control problem, replace the batteries in the remote control and try changing it.
Some who had their remote in send mode had to go to their remotes to take the batteries out to get their problem solved.
This can work for you, too.
Samsung TV Power Light Blinking Won’t Turn On Fix 2
You should definitely check to see if your surge protector is the issue. Unplug all appliances that plug into the surge protector and then look for an open wire connection.
Your TV should automatically turn on and light up when you plug it in to the outlet.
You can get a new surge protector as whatever damaged it could have damaged your TV if it was directly connected to the power source.
Samsung TV Power Light Blinking Won’t Turn On Fix 3
Power off your TV, disconnect the AC power from it, and press and hold the power button on your TV for 10 seconds.
Turn off your power adapter, wait for one minute, then plug it back in and hit the power button once.
This should fix the issue. It’s a sort of reset for your TV set.
You’ll find the power button (touch-sensitive) on the back of your TV.
You can also try plugging your TV set into the wall outlet when it’s not being used.
Be patient before plugging in this charger.
If you try all the above-mentioned options and it still won’t come on, then it’s probably a problem with its capacitor.
If your television is still under warranty, Samsung Electronics has a special customer support service available.
Tell them the problem and they’ll have it fixed for you.
If your TV set is out of warranty, you’ll have to find someone who will fix it for free.
Samsung TV Power Light Blinking Won’t Turn On Fix 4
When you disconnect all the HDMI devices connected to your TV set, the power light blinking won’t turn on can be a result of a HDMI glitch. Just unplug all the HDMI devices and the problem should be fixed.
Plugging in cable box into a different port than you originally connected it to helps when it’s time to disconnect it.
If you want to use the attached device, such as a game console, all you have to do is select the HDMI port to go into the console’s view.
If you power off the console without switching the TV source back to HDMI 1, you will likely experience this same issue all over again. Switching the TV source to HDMI 2 fixes the issue.